DiskMend

Updated 2026-11-16 · 6 min read

How to Recover Files from a Corrupted External Hard Drive

Hard drive corrupted, unreadable or throwing I/O errors? Step-by-step guide to safely rescue your documents and photos before attempting any repairs.

External hard drives are vulnerable to sudden filesystem corruption caused by improper disconnections, power flickers, or developing bad sectors. When Windows or macOS reports that the drive is unreadable, accessible files seem permanently locked away.

Filesystem corruption rarely destroys the actual magnetic data tracks instantly. Specialized data recovery engines can read around damaged metadata sectors to reconstruct intact files. Here is how to pull your files off safely.

Signs of Filesystem Corruption vs. Mechanical Failure

Logical corruption manifests as RAW filesystem warnings, zero-byte volume reports, or 'Access is denied' errors. The drive spins quietly without clicking or screeching sounds.

If the drive emits repetitive clicking, grinding, or beeping, power it down immediately: physical head or spindle failures require cleanroom data recovery, not software scanning.

Why Operating System Repair Tools Cause More Harm

Windows CHKDSK and macOS First Aid are designed to fix filesystem consistency for the OS, not to safeguard personal files. They discard cross-linked files and truncate orphaned clusters without asking.

Software extraction in read-only mode guarantees zero write operations to the fragile disk.

Salvage Reading with DiskMend

When a read fails, DiskMend retries the block in smaller pieces and then sector by sector, and gives up on an area after 64 unreadable sectors in a row instead of retrying forever. For a drive that is clearly failing, DiskMend can first copy it to an image file in two passes: readable areas are copied quickly and damaged regions are skipped, then the skipped regions are retried sector by sector. The scan then runs on the image, so the drive itself is read only once.

Step by step

  1. 1

    Connect drive directly

    Plug the external drive into a rear motherboard USB port without hubs.

  2. 2

    Launch DiskMend

    Select the corrupted disk from the physical device list.

  3. 3

    Run read-only deep scan

    Allow DiskMend to catalog existing file tables and carve raw file signatures.

  4. 4

    Inspect file health

    Check photo previews and each file’s intact or partial status.

  5. 5

    Save files to a safe location

    Export the recovered data to your PC's internal SSD or a new external drive.

Corrupted Drive Recovery Strategies
Drive ConditionPrimary SymptomRecommended ActionSuccess Rate
Logical / MetadataRAW volume, access deniedDirect read-only scan (DiskMend)Good
Developing Bad SectorsSlow response, CRC errorsSalvage-read sector skippingPartial (depends on the damage)
Physical / MechanicalRepetitive clicking, grindingPower off, professional cleanroomRequires hardware lab

Frequently asked questions

Can I recover files from a corrupted hard drive for free?+

DiskMend lets you scan, view the complete list of found files and preview photos for free. You only purchase a license when you are ready to save your files.

Why does my external drive freeze File Explorer?+

Windows keeps retrying unreadable sectors, which can make File Explorer hang. DiskMend gives up on an unreadable area after a limited number of attempts and keeps reading the rest of the drive.

Is it safe to format a corrupted hard drive?+

Only AFTER you have recovered your critical data. Formatting wipes the remaining directory structures.

Guides

More guides

Guides →